Attractive School Ring Guards
White Gold is fine Gold, .999 or better purity, mixed with three other metals (Copper, Nickel, and Zinc) to make the alloy (White Gold) stronger and more suitable for jewelry making. It has the same quality as Yellow Gold, just a slightly different alloy mixture. Yellow Gold is alloyed with Silver, while White Gold is alloyed with Nickel, it is that simple!
The ring guard in these pictures is 14K WGF (White Gold Filled), a very good quality jewelry accessory item which is attractive and durable, providing a life time of use. Please read my article Gold or Gold Filled?? for an explanation between 14K Gold and 14K Gold filled jewelry pieces.
|
SPECIAL NOTE: This listing is for "White Gold School Ring Guards, and Yellow Gold School Ring Guards" in 2 sizes each.
I also have available for purchase,White Gold Ring Guards" in 3 sizes.
And, I stock and sell, Yellow Gold Ring Guards in 3 sizes
|
You can choose between WHITE GOLD OR YELLOW GOLD and between the REGULAR OR LARGE SIZE below.
This particular Ring Tightener is designed for a person who want to wear a larger size ring; high school class ring, college graduation ring, a special family keepsake and etc. It is made of heavier gold plate and is wider than most ring guards to better fit the wider ring shank of mens rings.
SOME COMMON RING-FIT PROBLEMS.
1. All rings must be large enough to fit over the knuckle, but often tend to be too large to sit upright on the finger.
2. Stones can make a ring "top heavy" causing the ring to "spin" or "roll" (often ending up on the palm side of your hand). If your ring is too loose after passing over your knuckle the "ring spinning" is even greater.
3. A loose ring can be lost during activities; a problem when running your fingers through your hair, to say nothing about trying to type while pressing your fingers together, all are problems easily fixed with this Ring Wrap.
4.They are easy to put on and remove from your ring. Once your ring is positioned on your finger simply push "up" on the "bottom wrap" until the ring feels comfortable to you.
5. Children rings which need to be grown into have an easy solution... just use a Ring Guard until their ring fits and they can enjoy it without the fear of losing it.
6. Occasional finger swelling can be a problem. The Ring Wrap can be easily adjusted when a looser fit is needed.
7. This Ring Guard Tightener allows the ring to expand over the knuckle, yet fit snugly and comfortably on your finger.
CAN I INSTALL RING GUARD MYSELF?
YES YOU CAN! SIMPLY FOLLOW THE EASY STEPS LISTED BELOW WITH THE ASSOCIATED PICTURES ON THE LEFT.
|

STEP #1. Place the ring Shank inside of the curved arm of the ring Guard and bend the tabs on each side toward the outside of ring shank. (Pictures #1 & #2) The inner tab of the ring guard points down inside of the ring shank and gives more support for the ring guard.
|
|

STEP #1...Picture #2
|
|

STEP #2. Push down on the ring guard with a long round tapered object until the ring fits your finger, and it takes the shape of the shank.
|
|

STEP #3. Be sure the ring shank rests at the back of the ring guard arm, and using a pair of small needle nose pliers, bend the tabs around the ring shank.
|
|

STEP #4. With your pliers, use a circular motion, and carefully, tighten the ring guard tabs to the ring shank.
|
|

STEP #5. Make sure the inside of the ring guard arm is tightened.
|
You've done it!
Once the ring guard is in place, you can adjust the "size" of the ring merely by pushing up or down on the middle band (wrap) of the ring guard.
SPECIAL NOTE: This listing is for 3 ring guards in one lot.
Back to Accessories | Go To Home Page